Toll Free 800.456.2809
Phone 904.781.2809
Fax 904.786.2116

Home of the "Big Bite" Lifting Clamps
  
 

Model HL

  
 

Horizontal Lifting Clamp
Used in pairs, sets of pairs, or in a tripod arrangement to lift and transfer plate in a horizontal position only.
Non-Locking
High Strength Shock Resistant Steel
Provides for longer clamp life.
Rated for 420 Brinell Surface Hardness
Grippers are rated to lift material with a surface hardness of up to 420 Brinell.
Wide Jaw Openings
 Wider jaw openings available in Model HLW.

Available with smooth gripping surface of bronze or stainless steel for handling plate with a surface hardness in excess of 420 Brinell and polished metals

Dual Cam Model HLD are also available.
 
 
 
Safety Clamps Model HL- Lock
Always read the operator's manual supplied with each clamp before use.
 
Dimensions
Exploded View
   
As top sling angle increases, the clamp's rated capacity decreases.
Top Sling Angle
Rated Capacity
0 - 60°
100 %
61 - 90°
75 %
91 - 120°
50 %
Never Exceed 15 degrees side loading.
 
     
 
     

Home | Support | Contact | Catalog

The data contained in this web site has been carefully compiled to ensure accuracy. Safety Clamps, Inc.
shall not be liable for any damages whatsoever, direct or indirect, based upon any information contained in this web site.
Always read the operator's manual supplied with each clamp before use.
Safety Clamps, Inc.
233 Santa Barbara Ave. Jacksonville, Florida 32254
 Phone 904-781-2809 Fax 904-786-2116