Safety Clamps, Inc. Celebrating 40 years American Made

Phone 1-800-456-2809 Fax 1-904-786-2116


Model HLDW
Dual Cam Non Locking Clamp
Horizontal Lift Only
6, 12, and 16 Ton Rated Lift Capacities Per Pair
Horizontal Lifting Clamp
  • Used in pairs, sets of pairs, or in tripod arrangement to lift and transfer plate in a horizontal position only.
Non Locking

Extra Wide Jaw Openings

  • Extra wide jaw openings allow for better unloading and transporting of stacked horizontal plates.


Dual Gripping Cams

  • Dual serrated gripping cams rated for material with a surface hardness up to 420 Brinell.
  • Also available with smooth gripping surface of bronze or stainless steel for handling plate with a surface hardness in excess of 420 Brinell and polished metals.
Horizontal Plate Clamp Model HLD
Always read the operators manual supplied with each clamp before use.

Home About Us Products Support Contact Us Email SC_Menu2 Image Map


As top sling angle increases, 
the clamp's rated capacity decreases.
Top Sling  Angle
  
Rated Capacity
0 - 600
 =
100%
61 - 900
 =
75%
91 - 1200
 =
50%
6 TON/PR.
12 TON/PR.
16 TON/PR.
A
2"
2"
2 5/8"
B
0 - 6"
0 - 6"
0 - 6"
C
11 3/8
11 3/8
12 3/4
D
11 3/8
11 1/2
16
E
1
1
1 3/16
F
1 1/8
1 1/4
1 5/8
G
9
9
9 1/2
H
1
1
1
J
7 3/4
7 3/4
8 1/2
K
Max
19 3/4
19 3/4
22 1/2
WT
lbs.
150/pr.
175/pr.
275/pr.
Note: All rated lift capacities and weights are per pair.
Specifications are subject to change without notice

About | Products | Support | Contact | Home

The data contained in this web site has been carefully compiled to ensure accuracy. Safety Clamps, Inc.
shall not be liable for any damages whatsoever, direct or indirect, based upon any information contained in this web site.
Always read the operators manual supplied with each clamp before use.
Safety Clamps, Inc.
233 Santa Barbara Ave.
Jacksonville, Florida 32254
 Phone 904-781-2809
Fax 904-786-2116