Parts and Repair Kits for Clamps manufactured by Safety Clamps, Inc., such as vertical plate clamps, horizontal plate clamps, plate clamps, beam clamps, drum clamps, girder clamps, materials handling clamps, lifting clamps, Big Bite lifting clamps etc.

Safety Clamps, Inc. Celebrating 40 years American Made

Safety Clamps, Inc. is a proud member of AWRF

Safety Clamps Parts and Repair Kits

Part Number	Part Name Please Specify Clamp Model
SC-10	Lifting Shackle
SC-10U	Universal Lifting Shackle
SC-12^*	Lifting Shackle Pin
SC-14^***	Universal Shackle Pin
SC-16	Body Bolt Assembly- 2 required (1 spacer with 1 bolt and nut)
SC-16AUX	Body Bolt Assembly for Auxiliary Locking Clamp - 2 required (1 spacer with 1 bolt and nut)
SC-35^*	Connecting Cam Yoke Pin
SC-37^*	Connecting Cam Yoke Pin with Roll Pin
SC-42^*	Gripping Cams for all Models, 2 - 20 Ton Except Model VL-SJ (2 required)
SC-42ST	Stainless Gripping Cams for all Models, 2 - 20 Ton Except Model VL-SJ (2 required)
SC-44^*	Gripping Cam Step Pin
SC-46	Gripping Cam Connecting Arm
SC-50^ OR SC-50A^	Gripping Cam for 1/2 and 1 Ton Model VL, VLC, VLX, and V (1 required) NOT INTERCHANGEABLE Gripping Cam for 1/2 and 1 Ton Model AVL, AVLC, AVLX, AV, and SBC (1 required)
SC-50ST^ OR SC-50AST^	Gripping Cam for 1/2 and 1 Ton Model VL, VLC, VLX, V, VL-BC, VL-Channel, HBC, and HL-Lock(1 required) NOT INTERCHANGEABLE Gripping Cam for 1/2 and 1 Ton Model AVL, AVLC, AVLX, AV, SBC, and 1/2 and 1 Ton VL-SJ(1 required)
SC-52	Griping Cam Spacers For All 1/2 and 1 Ton Models
SC-54^*	Gripping Cam Pin with Roll Pin
SC-61^*	Spring Assembly (Spring, Yoke, Cotter Pins)
SC-65	Lock Assembly (Handle with Shaft, Locking Cam and Roll Pins)
SC-66	Auxiliary Lock Assembly (Handle with Shaft, Auxiliary Lock, Locking Cam, and Roll Pins)
SC-70^*	Rocking Swivel Die with Bolt and Lock Nut
SC-70ST^*	Stainless Rocking Swivel Die with Bolt and Lock Nut
SC-80	Connecting Cam Yoke - All Models Including HL-Lock- with Separator Pin (2 required)

^*Part included in repair kit - see repair kit information below.
^{** Kit includes only one part- specify 50 or 50A.
50 and 50A are NOT INTERCHANGEABLE.}
^{***Part included in repair kit for models with universal
shackle.}

**How To Order Safety Clamps Replacement Parts**

When ordering Safety Clamps replacement parts prefix each part number by the rated
capacity of the clamp in tons and model designation of the clamp.
*Example*:	The lifting shackle for a one ton Model VL clamp is part No. SC-10. To get the proper lifting shackle for a 1 ton rated capacity VL clamp, prefix the part number with a 1 and the model of the clamp, VL. Part number 1-VL-SC-10 specifies a lifting shackle for a 1 ton Model VL clamp.

**SAFETY CLAMPS REPAIR KITS** **ADVANTAGES**
1. Save up to 25% over loose parts ordering. 2. More thorough and proper maintenance. 3. Longer tool life. 4. Eliminate human error and guesswork. 5. Maintenance simplified. 6. Reduce loose parts inventory.

The only parts included in each kit are those which receive wear from usage.
Slow wearing parts such as the shackle, body bolts and lock parts are not included.

ALL working parts of any SAFETY CLAMP are REPLACEABLE. However, a Safety Clamp Repair Kit
is usually all that is required. Kits are available for all sizes in all models.

About | Products | Support | Contact | Home