Phone 1-800-456-2809 Fax 1-904-786-2116

Models AVLX and VLX
Locking Clamp
Horizontal to Vertical - 90o

1/2 through 3 Ton Rated Lift Capacities

Extended Wedge Shaped Jaw
  • Used to wedge the clamp between the top two plates of steel, when stacked, to fully engage the clamp.
Horizontal to Vertical Lift
  • Capable of turning a single steel plate from horizontal to vertical to horizontal through a 90o arc.
Locks Open and Closed
  • Lock operates easily with load in a secured position.
Gripping Cams
  • Single gripping cam on 1/2 and 1 ton capacities.. 
  • Dual gripping cams on 2 and 3 ton capacities.
High Strength Shock resistant Steel
  • Provides for longer clamp life.
Working Parts Enclosed 
  • Working parts remain inside body in the "locked closed" and the "locked open" positions.
  • Protects parts for longer use.

Note: The 1/2 and 1 ton Model AVLX is the same as the 1/2 and 1 ton Model VLX except for the jaw opening (A).
Vertical Plate Clamp Model AVLX

Vertical Plate Clamp Model AVLX
 

Always read the operators manual supplied with each clamp before use.

 Home About Us Products Support Contact Us Email Exploded View AVLX_VLX_VL_CHANNEL_AVL_VL_AVLC_VLC_VLSJ Image Map






 
1/2 & 1 TON
AVLX
1/2 & 1 TON
VLX
2 TON
VLX
3 TON
VLX
A
0 - 7/8"
0 - 1 3/8"
0 - 1 5/8"
0 - 1 5/8"
B
6 3/4
6 3/4
9
9
C
6 7/8
6 3/4
9
9
D
MAX
16 3/8
10 5/16
21 1/4
21 1/4
E
2 1/2
 2 1/2
3 1/2
3 1/2
F
5 3/8
5 1/4
8
8
G
2 1/2
2 1/2
4
4
H
1 1/2
1 3/8
2 3/8
2 3/8
J
5/8
5/8
7/8
7/8
K
1/2
1/2
3/4
3/4
WT
lbs.
12
12
30
31

 

About | Products | Support | Contact | Home

The data contained in this web site has been carefully compiled to ensure accuracy. Safety Clamps, Inc.
shall not be liable for any damages whatsoever, direct or indirect, based upon any information contained in this web site.
Always read the operators manual supplied with each clamp before use.
Safety Clamps, Inc.
233 Santa Barbara Ave.
Jacksonville, Florida 32254
 Phone 904-781-2809
Fax 904-786-2116