Safety Clamps, Inc. Celebrating 40 years American Made

Phone 1-800-456-2809 Fax 1-904-786-2116

 

Models AVL and VL with Universal Shackle
Locking Clamp
Horizontal to Vertical - 180o

1/2 through 12 Ton Rated Lift Capacities
Universal Shackle
  • Allows for side loading of lifting shackle up to 90o. 
  • The rated lift capacity is lowered as the angle of the pull increases (see figure 1).
Horizontal to Vertical Lift
  • Capable of turning a single steel plate from horizontal to vertical to horizontal through a 180o arc.
Locks Open and Closed
  • Locks open to facilitate loading and unloading clamp.
  • Locks closed onto material for a more secure lift.
Gripping Cams
  • 2 through 12 ton lift capacities incorporate dual gripping cams.
  • Gripping die is self-aligning for increased surface contact.
  • Gripping cams and gripping die are rated for material with a surface hardness of up to 420 Brinell.
Wide Jaw Openings
  • Wider range within rated lift capacity.
High Strength Shock resistant Steel
  • Provides for longer clamp life.
Working Parts Enclosed .
  • Working parts remain inside the body in the "locked closed" position and the "locked open" position.
  • Protects parts for longer use.

*Also Available with an Auxiliary Lock and/or Stainless Gripping Cam(s) and Gripping Die

Note: The 1/2 and 1 ton Model AVL is the same as the 1/2 and 1 ton Model VL except for the jaw opening.

 Safety Clamp Model VL with Universal Shackle
 

Model VL with Universal Shackle

Always read the operators manual 
supplied with each clamp
before use.
 
 
  Home About Us Products Support Contact Us Email Exploded View Dimensions AVL_VL_Universal_Main Image Map







 

The Universal Shackle permits side loading of the lifting shackle at 100
percent of rated capacity from vertical to 30 degrees, 75 percent of rated
capacity between 30 and 45 degrees and 50 percent of rated capacity
between 45 degrees and 90 degrees.
Figure 1
About | Products | Support | Contact | Home
The data contained in this web site has been carefully compiled to ensure accuracy. Safety Clamps, Inc. 
shall not be liable for any damages whatsoever, direct or indirect, based upon any information contained in this web site. 
Always read the operators manual supplied with each clamp before use. 
Safety Clamps, Inc. 
233 Santa Barbara Ave. 
Jacksonville, Florida 32254 
Phone 904-781-2809 
Fax 904-786-2116