General Information

All products manufactured by Safety Clamps, Inc. meet the ANSI/ASME B30.20 standards.

IMPORTANT: Information contained herein is for the presentation of pertinent illustrative and specification data for use in the selection of suitable Safety Clamps, Inc. products consistent with the use intended by Safety Clamps, Inc. Refer to Operator’s Manuals for information on application, operation and lifting clamp maintenance of each particular model or product.

Photographs of products shown which may include examples of applications are for illustrative purposes only. Please refer to the Operator’s manuals for approved applications of Safety Clamps, Inc. products.

OPERATOR’S MANUALS: PRIOR TO USE OF ANY SAFETY CLAMPS, INC. PRODUCT, EACH PURCHASER AND OPERATOR SHOULD READ AND UNDERSTAND FULLY ALL OF THE PERTINENT INSTRUCTIONS AND RECOMMENDATIONS CONTAINED IN THE OPERATOR’S MANUALS FOR THE PARTICULAR PRODUCT INVOLVED.

The Operator’s Manuals contain recommended application, operation and maintenance instructions for all Safety Clamps products listed. A copy of the Operator’s Manual pertaining to each such product is attached to the product or enclosed within the shipping carton with each product.
In addition, Operator’s Manuals may be obtained from Safety Clamps Distributors or by contacting Safety Clamps, Inc. at 1-800-456-2809 or info@safetyclamps.com.

INSPECTION AND REPAIR: Safety Clamps’ products may be returned to the factory for inspection and repair in accordance with an established fee schedule. Neither operators nor maintenance personnel of the user of such products should engage in any modification of any Safety Clamps’ product for any reason. Installation of parts and repair kits should be effected only in accordance with instructions included within the operators manual.

DELAYS: Safety Clamps, Inc. is not liable for any delays in manufacturing or shipping caused by fire, strikes, lockouts, war, insurrections, inability to secure materials, government interference or regulations, delays in transportation, or other circumstances beyond reasonable control.

RETURN OF GOODS: No goods may be returned without written consent. Special clamps are not returnable.

 

Limited Warranty

All products manufactured by Safety Clamps, Inc. carry a limited warranty that the product is free from defects in materials and workmanship.  This warranty applies only to the original end user of the clamp and is valid for 10 years from the date of purchase.

Conditions
This warranty only covers defects in materials and workmanship and only if the clamp has been inspected, maintained, and operated within the guidelines of the clamp’s Operation, Maintenance, and Repair Manual.  The warranty does not cover wear to parts such as pins, grippers, lock springs, etc.  If a defect is found within the warranty period, the clamp will be repaired or replaced by determination of the manufacturer.
No warranty is given due to:
Regular wear
Incorrect use
Overload
Modification of the clamp
Improper maintenance and/or repair

 

This web site supersedes all previous publications by Safety Clamps, Inc. and, further supersedes any materials previously published or described by Safety Clamps or its distributors as to the contents hereof.